VTX-B1R-B - TeamVTX VTX-B1R Nitro 1/8th Buggy RTR w/.26 Drill Start Engine
NEW RELEASE VTX-B1R 1/8 Nitro Buggy RTR
The successor to the popular VTX-B1 RTR buggy, the new VTX-B1R comes loaded with tons of new features while maintaining over 98% parts compatibility with the VTX-B1. You now get an FM radio with sub trim and end point adjustments and the powerful .26 drill start engine gets an overhaul with improved quality internals topped off with a dual stage air filter. Gone are the sliding engine mounts, replaced instead by fixed engine mounts which will accept most popular .21 and bigger engines. Nearly every plastic component comes in a new and improved material compound, along with a new rear upper arm, modified rear uprights, new design ring and pinion gears, and all new tires. Even the shock spring clips are factory installed to complete the assembly to our Factory Team Driver specifications. Enjoy racing or bashing with all these improvements at the same low price as before.
Adjustable Ackerman & Pivot Ball Front End |
Big Bore Shocks with 3.5mm Shocks |
Powerful Vertex .26 Drill Start Engine & Aluminum Tuned Manifold pipe |
FEATURES:
| Chassis: |
3mm 6061-T6 Aluminum Chassis; Front and rear Aluminum chassis braces |
| Suspension: |
Front Pivot Ball, Heavy-Duty Suspension Arms, Front & Rear Sway Bars |
| Shocks: |
13mm big bore shocks with 3.5mm shafts and 1.4mm pistons |
| Engine: |
.26 Vertex drill start engine |
| Exhaust: |
Polished Aluminum Tuned Pipe & header |
| Radio: |
TeamVTX 2-Channel FM Transmitter and Reciever with High Torque & High speed Servos |
| Transmission: |
Single-Speed; 4WD; Full Bearings |
| Wheels: |
White Spoke wheels |
| Body: |
Pre-Painted Body w/Flame Designs (blue/orange or red/yellow) |
| Gears: |
14T clutchbell, 46T steel spur gear, spiral-cut steel ring/pinion gears. |
| Clutch: |
3-Shoe Composite |
| Fuel Tank: |
125CC | |
INCLUDES:
Assembled Ready to Run TeamVTX Buggy with .26 Size Engine & Radio System, Pre-Painted Body, Pre-Mounted Tires on White Spoke Wheels, Instruction Manual and Decals, Hex Wrench Set, Cross Wrench, Drill starter.
REQUIRES:
12 AA batteries, 6 cell 7.2v battery & charger, Glow igniter, Fuel Bottle, Glow Fuel.
SPEC.:
Width: 315mm
Height: 490mm
Track: Front-306mm, Rear-308mm
Wheelbase: 325-330mm
Gear Ratio:11.71:1
Weight: 3.3kg
Gear Ratio: 11.71:1
Servo: kg(F) ; kg(R)
Ground Clearance: mm | |
